CUSTOM IRON BUILD | Miura KM-700 x Fujikura Axiom | Loggerhead Golf
If you are searching for a unique set of irons, this might just be one of the coolest sets you can get! The Miura KM-700 irons took 5 years to design and are recognizable by Miura-San’s stamp of approval, the red hanko stamp. These heads are as premium as premium gets, and we didn’t stop there! Mounted on the Fujikura Axiom shafts with custom BB&F Co. ferrules, this is truly a unique set of irons. Oh, and of course the green Lamkin grips to match! Hope you enjoy the build process.
Let us know if you have any questions or if you want us to build you a custom set of irons!
Components:
Iron Heads : Miura KM-700
Shaft : Fujikura Axiom 105 Stiff Flex
Grip : Lamkin UTX Green
Ferrules : BB&F Co.
#golf #custom #howto #golfclub
Book your lesson at www.loggerheadgolf.com
Follow us on Instagram @loggerheadgolf
Beautiful set of irons. Outstanding attention to detail and meticulous craftsmanship. Well done!
Absolutely beautiful irons!!
Amazing – love the work. I was fitted into this combo this summer. Have not pulled the trigger yet. One of the reasons is that my builder really wants to spine the shafts. I think it messes with the whole idea of having something truly beautiful in your bag though.. What difference does it really make? I play Baldo 568MC Competizione with 10th anniversary Modus 115 today. I need more lift and a smoother turf interaction though.
great video no stone unturned in the build but one question what did you slip inside the grip when swing weighting …?
Way to much BS building those clubs, Great for show absolution does nothing for performance. Watch the tour trailers build a club, shaft out of 5 dozen in the draw, head out of the draw set SW rock on. NO CPM, NO FLO’ing zero BS. Nice work but useless. OBTW been building for 20 years
What orange grips are hanging on the wall?
Those lamkins looking extra cordy
Very good work my dude ~ gets the nerd juices flowing !
How do you have time to run a club builder when you are out caddying for Max Homa?
Brother you truly a craftsman and your attention to every detail shows your incredible skills. Enjoyed watching every minute of this build. Keep them coming and God Bless
Sweet vid. What grit sand paper do you use to work down the ferrules so that you don’t scratch up the hosel?
learn a lot from this video.. especially on the steps need t be performed. thanks loggerhead golf.
may i know what type of saw disc you use to cut graphite shaft? can it be used to cut steel shaft as well?
I had a set of their Baby Blades , but went back to my custom fit Kenneth Smith Stainless Steel blades , they had better feel . AND I still have them from my 1993 fitting , sold the baby blades many years ago.
I have a PI 401 set love em
細部に神は宿る。彼の仕事はすばらしい！
Is it possible to soft step the Axiom 2 times? Might have to send my clubs and shafts in
That’s art 🖼️
Put some damn safety glasses on ffs
Hello, can you sell me some irons from 6 to pw and send them to me, I live in Texas
I would like a shaft of about 80 g maximum and the irons km 700.
Thank you
Beautiful job
How many wraps of tape b4 it starts to affect swing weight?
Once you show a process you don’t need to show it over and over.
I like it… That’s how i like to build my clubs, too. I do everything but the frequency but only since i don’t have a freq meter. Quality build.
Amazing work, Quick question. Are you always using tungsten powder in your epoxy and how much does it affect the Swing weight? 😁⛳️
this is my dream set! i’m playing miura mb5005 and km701 wedges. saving up😊
This music reminds me of metroid prime. Sweet irons.
Craftsmanship and attention to detail. I know where to go in Wilmington for my next set now.
I loved watching this video. Your attention to detail is fantastic. Well done.
Yes, no doubt a skilled craftsman at work. However, as a man who hates hybrids and even 5 woods, uhm….I’m not paying £4000 for six irons. I play Driver then 2 iron to gap wedge sw and lob. Guy whose paid for these us gonna stick them in his bag with all sorts of weird hybrids combinations and then wants to show em off to his club pals and bet envy points. Prob wont even get iron covers for them and they’ll get bag chattered to fuck. Uhmm…..no thanks….only ultra rich iron collectors need apply. Golf is about putting a set together to enable you to get ball in hole with fewest strokes. Get custom fit..yeah…but this…just ridiculous
So clean! Could watch this all day! Just started my own in the garage.
I wished I had my prototypes of these from the 90’s when Tom Stites had his shop
Artist at work… brilliant job bro!!!!
Fantastic work.
Does the Lamkin logo end up being in the same spot on every club?
Pretty
does sanding graphite affect spec(flex, weight)?
found u at top golf yesterday,we was beside u
Can I send the bits to you for assembly or do you only assemble sets you’ve sold? Thanks! Lovely work!
Gotta be a single digit to hit those irons.
What are you putting in the grip on swingweight machine @6:16? Rolled up grip tape?
This is awesome to watch!! If someone were to send you all the components to make an iron set, could you assemble them? I don’t know of anyone local who takes this much pride in making clubs. I’d love to have my set built by you guys!
Sorry diese Arbeit ist nicht gut, die Bearbeitung der Schäfte ist dilettantisch, kein Frequent Bau keine richten des Schaftes. Über die verwendeten harten Ferulles kann man auch streiten.
Piece of Art…well done 👍🏻
A master at work, have to keep you in mind on my next set
Simply incredible attention to detail. Beautiful irons 👌
Wish I could afford these irons..
Ive been following for a while on Insta but just found this on Youtube. This video is phenominal. Its nice to see folks checking CPM!
@DJ – It is so cool to watch you in your element – and it really is YOUR element!! So talented!!!!!
What ruler is that?
Do you apply ( + or – ) the weight that you lose when shaving the hosel into the overall weight of the club ?